汽配人首頁 > 問答首頁

麻煩機械齒輪的朋友再幫一下忙！

1. Geometric dimensioning& tolerancing symbology per asme Y14.5M-1994 2. Cosmetic requirements per A-5951-1509 (1741.100A) 3. Adherence to A-5951-1561 (608) required 4. indicates control dimension 5. indicates functionally critical dimension 6. indicates an assembly critical dimension 7. indicates a dimension identification number for inspection and tracking .numbers assigned per vcd dimension numbering process document A-5959-0638-1 8. Exterior radll per 3D model 9. (not used) 10. draft angles per 3D model 11. gate location remnant 0+0.5 12. flash 0.1 max 13. ejector pin marks 0=0.2 14. parting line mismatch 0.1max 15. this is a partially dimensioned drawing used in conjunction with the 3D model. unspecified dimensions are controlled by the XXX+ column in the tolerance block. 16. tool number location 17. cavity number location 18. material ID location >pom< 19 not used 20 revision level location 21 packaging specified by hp 22 toleranced dimensions used to control location or orientation of a feature are ori: 問提問者：網友 | 2018-08-08

最佳回答

哈哈，怎么還是沒人回答？看來樓主的問題還真不簡單！樓主同志，看好了，我這可不是軟件翻譯的啊！有問題可以隨時問我，我的郵箱在個人信息里，是公開的。 1.Geometric dimensioning& tolerancing symbology per asme Y14.5M-1994 幾何尺寸&名義最大誤差執行標準： asme Y14.5M-1994。 2.Cosmetic requirements per A-5951-1509 (1741.100A) 外觀要求執行標準：A-5951-1509 (1741.100 A)。 3.Adherence to A-5951-1561 (608) 執行標準： A-5951-1561(608)。 4.indicates control dimension 顯示控制尺寸。 5.indicates functionally critical dimension 顯示實用臨界尺寸。 6.indicates an assembly critical dimension 顯示任意組件的臨界尺寸。 7.indicates a dimension identification number for inspection and tracking. numbers assigned per vcd dimension numbering process document A-5959-0638-1 顯示用于檢驗和跟蹤的尺寸識別碼。識別碼分配執行標準：依照可變電容二極體尺寸分配標準文件 A-5959-0638-1。 8.Exterior radll per 3D model 外形執行標準：依據3D模型 9.(not used) （未使用） 10.draft angle s per 3D model 草圖傾斜角：依據3D模型 11.gate location remnant 0+0.5 入口位置預留 0+0.5 12.flash 0.1 max 飛邊最大值：0.1 13.ejector pin marks 0=0.2 出口識別標志 0=0.2 14.parting line mismatch 0.1max 分模線錯位最大值： 0.1 15.this is a partially dimensioned drawing used in conjunction with the 3D model.: 回答者：網友

產品精選

我來回答