汽配人首頁 > 問答首頁

電化學傳感器原理翻譯

電化學傳感器的構成是:將兩個反應電極――工作電極和對電極以及一個參比電極放置在特定電解液中，然后在反應電極之間加上足夠的電壓，使透過涂有重金屬催化劑薄膜的待測氣體進行氧化還原反應，再通過儀器中的電路系統測量氣體電解時產生的電流，然后由其中的微處理器計算出氣體的濃度。電化學傳感器結構示意圖與工作原理圖如下圖所示。氣體首先通過微小的毛管型開孔與傳感器發生反應，然后是憎水屏障，最終到達電極表面。穿過屏障擴散的氣體與傳感電極發生反應，傳感電極可以采用氧化機理或還原機理。這些反應由針對目標氣體而設計的電極材料進行催化。通過電極間連接的電阻器，與電氣濃度成正比的電流會在正極與負極間流動。測量該電流即可確定氣體濃度。求英文翻譯: 問 提問者：網友 | 2017-08-28

最佳回答

The electrochemical sensor is: will constitute two reactions - work of electrode and electrode electrode and a reference electrodes placed in particular electrolyte, and then in the reaction between electrode voltages, add enough metal catalysts are through the film for measuring gas REDOX reaction, then the circuit by electrolysis gas produced when measuring system, then the current by microprocessor calculate gas concentrations. Electrochemical sensor structure and working principle chart drawing shown below. The first through tiny gas hole and capillary type sensor, and then is disgusting, water barrier to the electrode surface. Through the barrier of gas sensor electrode and diffusion, sensor electrode can react by oxidation mechanism or reduction mechanism. These reactions by targeting gas and design of catalytic electrode materials. The connections between the electrodes, and electrical concentration resistor is proportional to the current will flow in the positive and negative. Measure the concentration of gas current can be determined.: 回答者：網友

產品精選

我來回答